Switching the vehicle off
- Immobilise the vehicle.
- Turn the key fully towards you to position 1 (Stop) .
- Remove the key from the ignition switch.
Do not attach any heavy objects to the key as this could weigh down on it when in the ignition switch and cause a fault.
Key reminder
If the key is left in the ignition switch, an audible signal sounds when the driver's door is opened.
See also:
Manual controls
The wiper commands are issued directly
by the driver by means of the stalk A
and the ring B .
Windscreen wipers
A. wiping speed selection stalk:
fast (heavy rain),
normal (moderate rain),
in ...
Programming
Turn thumb wheel 1 to the "LIMIT"
position: the speed limiter mode
is selected but is not switched on
(PAUSE).
You do not have to switch the speed
limiter on in order to set the speed ...
Caution - towing a vehicle with automatic transmission
Put the selector lever in position N (neutral).
Towing with all wheels on the ground
Towing ring fixings are placed at the front and at the rear of the vehicle.
To access them:
- at the front: ...