Exiting economy mode
These functions are reactivated automatically the next time the vehicle is driven.
In order to resume the use of these functions immediately, start the engine and let it run for a few minutes.
The time available to you will then be double the period for which the engine is left running. However, this period will always be between fi ve and thirty minutes.
A fl at battery prevents the engine from starting (refer to the corresponding paragraph).
See also:
HDi 90 and HDi 110 FAP engines
Fill the fuel tank with at least fi ve litres
of diesel.
Open the bonnet.
Depending on version, unclip the
cover to gain access to the repriming
pump.
Squeeze and release the repriming
...
Changing a wiper blade
Procedure for replacing a worn wiper
blade with a new one without the use
of tools.
Before removing a front wiper
blade
Within one minute after switching off
the ignition, operate the wipers ...
"Motorway" function
System for indicating a change of lane
on a motorway.
Move the lighting stalk briefl y upwards
or downwards, without going
beyond the resistance point; the direction
indicators will fl ash 3 time ...






