See also:

Putting the wheel back in place
Put the wheel back in its housing. Unscrew the yellow central bolt by a few turns then put it in place in the centre of the wheel. Tighten fully until the central bolt clicks to retain th ...

Fitting the wheel
After changing a wheel To store the punctured wheel in the boot correctly, fi rst remove the central cover. When using the "space-saver" type temporary use spare wheel, do not exceed ...

Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on the towed vehicle. When t ...