Front lamps
- Headlamp dipped beam
- Main bea
m - Sidelamp
- Direction indicator
Note: A light mist film can appear on the internal surface of the headlamp lens in certain climatic conditions (low temperature, humidity). This disappears within a few minutes of switching on the headlamps.
Note: If it should be necessary to access the front RH headlamp, remove the cover by pressing the 2 clips.

See also:
Putting the wheel back in place
Put the wheel back in its housing.
Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
Tighten fully until the central bolt
clicks to retain th ...
Manual controls
The lighting commands are issued directly
by the driver by means of the
ring A and the stalk B .
Model without AUTO lighting
Model with AUTO lighting
A. Main lighting mode selection ring,
wi ...
Maintenance indicator
The maintenance indicator informs you when the next service is due, in conformity
with the servicing programme detailed in the vehicle’s Maintenance Guide. This information
is determined depending ...






