Maxi-fuses

* The maxi-fuses are an additional protection for the electrical systems. All work on the maxi-fuses must be done by a CITROËN dealer.
See also:
Starting the vehicle
Insert the key in the ignition switch.
The system recognises the starting
code.
Turn the key fully towards the fascia
to position 3 (Starting) .
When the engine starts, release the
key. ...
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...
12 V battery
All engines except V6 HDi
Starting the engine after disconnecting and reconnecting the battery
1. Turn the ignition key.
2. Wait approximately 1 minute before operating the starter in order to allo ...






