A few definitions…

Citroen C3 / Citroen C3 Owner's Manual / Instruments and controls / Trip computer / A few definitions…

Range

(miles or km)

(miles or km)

This indicates the distance which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) travelled.

This fi gure may vary following a change in the style of driving or the relief, resulting in a signifi - cant change in the current consumption.

When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).

If dashes are displayed continuously while driving in place of the digits, contact a CITROËN dealer.

(mpg or l/100 km or km/l)

This is the average fuel consumption during the last few seconds.

This function is only displayed from 20 mph (30 km/h).

Average fuel consumption

(mpg or l/100 km or km/l)

(mpg or l/100 km or km/l)

This is the average fuel consumption since the last trip computer zero reset.

Average speed

(mph or km/h)

(mph or km/h)

This is the average speed calculated since the last trip computer zero reset (ignition on).

Distance travelled

(miles or km)

(miles or km)

This indicates the distance travelled since the last trip computer zero reset.

Distance remaining to destination

(miles or km)

(miles or km)

This is the distance remaining to be travelled to the fi nal destination. It can be entered by the user.

If the distance is not entered, dashes are displayed in place of the digits.

    See also:

    Mats
    Removable component which protects the carpet against exterior dirt. Fitting When fi tting the mat for the fi rst time, on the driver's side, use only the fi xings provided in the wallet attached ...

    Changing a fuse
    Before changing a fuse, the cause of the failure must be identifi ed and rectifi ed. Identify the faulty fuse by checking the condition of its fi lament. Correct Incorrect Use the special ...

    Starting
    Manual gearbox - Ensure that the gear lever is in the neutral position. - Do not touch the accelerator. - In the case of diesel engine vehicles: turn the key to the drive position. Wait for the p ...