Reinitialisation
In the event of a malfunction you have to reinitialise the operation of the electric windows:
- release the switch and pull it again until the window closes completely,
- hold the switch for approximately one second after closing,
- press the switch to lower the window automatically.
The safety anti-pinch function is not active during these operations.
Always remove the key from the ignition when leaving the vehicle, even for a short time.
In the event of contact during operation of the windows, reverse the movement of the window. To do this, press the switch concerned.
When the driver operates the passenger electric window switches, they should ensure that no one is preventing correct closing of the windows.
The driver should ensure that passengers use the electric windows correctly.
Be aware of children when operating the windows.
See also:
Priming the diesel fuel system
HDi 135 and 140 engines
Detach the protection cover to access the priming pump.
HDi 90 and 110 engines
Detach the protection cover to access the priming pump.
In the event of running out of fu ...
Opening
Open the front left door.
Pull the interior control A , located at
the bottom of the door aperture.
Push the exterior control B to the left
and raise the bonnet.
Unclip the bonnet s ...
Changing a wiper blade
Procedure for replacing a worn wiper
blade with a new one without the use
of tools.
Before removing a front wiper
blade
Within one minute after switching off
the ignition, operate the wipers ...