Headlamp adjustment
To avoid causing a nuisance to other road users, the height of the headlamps should be adjusted in relation to the load in the vehicle.
0 . 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
2. 5 people + maximum authorised load.
3. Driver + maximum authorised load.
The initial setting is position "0" .
See also:
Access to the tools
The towing eye is installed in the boot
under the fl oor.
To gain access to it:
open the boot,
raise the fl oor,
remove the polystyrene storage box,
remove the towing eye from the
hold ...
Electrical adjustments
To adjust the electrical seats, switch on the ignition or start the engine if
the vehicle has gone into economy mode.
1. Adjustment of the seat height and angle, and longitudinal adjustment
a Ra ...
Boot
Luggage securing rings
Use the 2 side fi xings at the rear, as well as the 6 anchoring rings on the
boot floor and the rear seat backrest, to secure your loads. For safety reasons,
in case of h ...