Manual controls
The wiper commands are issued directly by the driver by means of the stalk A and the ring B .
Windscreen wipers
A. wiping speed selection stalk:
fast (heavy rain),
normal (moderate rain),
intermittent (proportional to the speed of the vehicle),
park,
single wipe (press downwards),
automatic, then single wipe (see next page).
Rear wiper
If a signifi cant accumulation of snow or ice is present, or when using a tailgate bicycle carrier, deactivate the automatic rear wiper via the multifunction screen confi guration menu.
B. rear wiper selection ring:
park,
intermittent wipe,
wash-wipe (set duration).
Reverse gear
When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating.
Programming
The function is activated or deactivated via the multifunction screen confi guration menu.
This function is activated by default.
Windscreen wash
Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a specifi ed time.
See also:
Taking out the wheel
Unscrew the yellow central bolt.
Raise the spare wheel towards you
from the rear.
Take the wheel out of the boot.
...
Rear screen demist and defrost
The control button is located on
the heating or air conditioning
system control panel.
Switching on
The rear screen demisting/defrosting
can only operate when the engine is
running.
Press thi ...
Audio settings
On/Off
With the key in Drive position M, press on control A to switch the radio on or
off.
Note:
- If the radio was on the last time you switched off the ignition, it will resume
automatically ...