"ISOFIX" mountings
Your vehicle has been approved in accordance with the new ISOFIX regulation .
The seats, represented below, are fi tted with regulation ISOFIX mountings:
These are three rings for each seat:
- two rings A , located between the vehicle seat back and cushion, indicated by a label,
- a ring B , behind the seat, referred to as the TOP TETHER for fi xing the upper strap.
This ISOFIX mounting system guarantees you fast, reliable and safe fi tting of the child seat in your vehicle.
The ISOFIX child seats are fi tted with two locks which are secured easily on the two rings A .
Some also have an upper strap which is attached to ring B .
To attach this strap, raise the vehicle seat's head restraint then pass the hook between its rods. Then fi x the hook on ring B and tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
For information regarding the ISOFIX child seats which can be installed in your vehicle, consult the summary table for the location of the ISOFIX child seats.
See also:
Total distance recorder
System which measures the total distance
travelled by the vehicle during its
life.
The total and trip distances are displayed
for thirty seconds when the ignition
is switched off, when the driv ...
Programmable heating
With the engine off, programmable heating preheats the coolant circuit in order
to optimise the engine operating temperature prior to starting.
The programmable heating system can be started imme ...
Removing the wheel
Parking the vehicle
Immobilise the vehicle where it
does not block traffi c: the ground
must be level, stable and not
slippery.
Apply the parking brake, switch
off the ignition and engage fi r ...