Putting the wheel back in place
- Put the wheel back in its housing.
- Unscrew the yellow central bolt by a few turns then put it in place in the centre of the wheel.
- Tighten fully until the central bolt clicks to retain the wheel correctly.
- Put the box back in place in the centre of the wheel and clip it.
- Put the polystyrene storage box back in place.
- Refi t the boot fl oor carpet by lightly folding it in two (refer to the section "Fittings - § Storage box").
On vehicles equipped with a "space-saver" type spare wheel, the punctured wheel cannot be stowed in place of the "spacesaver" wheel.
See also:
Screen
A. Speed limiter
(mph or km/h) or
Cruise control.
B. Gear change indicator.
C. Automatic gearbox information.
D. Range
(miles or km) or
Trip mileage recorder.
E. Service indicator
(miles or ...
Steering lock - Ignition - Starter
S: Steering lock
To unlock the steering, gently move the steering wheel while turning the key,
without exerting undue force.
When you remove the key, turn your steering wheel to lock the steerin ...
Windows
Electric operation
The driver uses the controls located on the door to operate the vehicle’s electric
windows.
Note: The windows can also be operated for a short period after the ignition
has be ...