Interior lighting
Interior lamp (1/W5W)
Unclip the cover of the interior lamp 1 with a thin screwdriver, close to the button, to access the faulty bulb.
Side reading lamps (2/W5W)
Unclip the cover of the reading lamp 2 with a small screwdriver at the switch end for access to the faulty bulb.
Boot lamp (W5W)
Unclip the unit by pushing it from the rear.
Sill lamps (W5W)
Unclip the lamp for access to the bulb.
See also:
Remote control
Note:
The simultaneous use of other high frequency equipment (mobile telephones, domestic
alarms, etc.) may momentarily hinder the operation of the remote control.
If there is a permanent fault, ...
Programming
Turn thumb wheel 1 to the "LIMIT"
position: the speed limiter mode
is selected but is not switched on
(PAUSE).
You do not have to switch the speed
limiter on in order to set the speed ...
Button controls
The controls at the steering wheel give you access to certain functions, without
you needing to use the radio-CD control panel.
...