Changing a fuse
Before changing a fuse, the cause of the failure must be identifi ed and rectifi ed.
Identify the faulty fuse by checking the condition of its fi lament.
Correct
Incorrect
- Use the special pliers to extract the fuse from its housing.
- Always replace the faulty fuse with a fuse of the same rating.
- Check the correspondence between the number etched on the box, the rating etched on the fuse and the tables below.
Installing electrical accessories
Your vehicle’s electrical system is designed to operate with standard or optional equipment. Before installing other electrical equipment or accessories on your vehicle, contact a CITROËN dealer.
CITROËN will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by CITROËN and not installed in accordance with its instructions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.
See also:
Hill start assist
To aid starting on a gradient, your vehicle is equipped with a system which keeps
it immobilised for a short time (about 2 seconds), the approximate time it takes
to move your foot from the brake ...
Dials
1. Rev counter.
Indicates the speed of rotation of the
engine (x 1 000 rpm).
2. Vehicle speed.
Indicates the current speed of the
moving vehicle (mph or km/h).
3. Fuel level.
Indicates the quan ...
CD changer source
CD Changer
This unit (if fitted) is located under the front centre armrest and can receive
6 CDs.
Inserting CDs into the magazine
- To insert a CD, press the LOAD button, then the one for the slo ...