Cargo net (Tourer)
the rear seats (row 2) when the luggage-cover blind is not fitted, or behind the front seats (row 1).
Note : when using behind the front seats, the backrests and the seat cushions must be folded down (see section on rear seats).
To install :
Fold down the backrests of the rear seats.
Position the cargo net roller over the two rails 1 located behind the rear seats (2/3 benchseat).
The two notches 2 must be positioned over the two rails.
Slide the 2 rails 1 into the notches 2 and push the roller (lengthwise) from right to left to lock it in.
Put the backrests of the rear seats back into place.
To use in row 1 :
Fold down the backrests of the rear seats.
Open the covers 3 of the corresponding high fixing locations.
Unroll the cargo net and position one of the ends of the net’s metal bars in the corresponding fixing location. Ensure that the notch is correctly lodged in the rail located inside the location 3.
Pull on the cargo’s net’s metal bar to position the other notch in the 2nd fixing location.
To use in row 2 :
Open the covers 4 of the cor responding high fixing locations.
From the rear benchseat, unroll the cargo net by pushing it to disengage the retaining notches.
Position one of the ends of the cargo net’s metal bar in the corresponding fixing location. Ensure that the notch is correctly lodged in the rail located inside the location 4.
Position the other notch in the 2nd fixing location and pull the metal bar towards you.
See also:
A new automotive experience
The new Citroen C3 retains a feature central to its unique personality: the
Zenith windscreen, providing best-in-segment visibility. Bringing the landscape
into the cabin, this true technological ...
Operating fault
In the event of a cruise control malfunction,
the speed is cleared resulting in
fl ashing of the dashes. Have it checked
by a CITROËN dealer.
When the cruise control is
switched on, be car ...
Daytime running lamps
On vehicles fi tted with daytime running
lamps, the dipped beams come on
when the vehicle is started.
This warning lamp comes on on
the instrument panel.
The instruments and controls (instrumen ...