Bonnet release
Bonnet
This operation should only be performed while the vehicle is stationary.
Open the door.
To unlock, pull release lever A.
Lift up lever B, then raise the bonnet.
Note: The panel may be hot after the vehicle has been in use.
Bonnet stay
Unclip the stay and pivot to lodge it in the catch indicated by a yellow arrow.
To eliminate any risk of burns, only handle the bonnet stay using the protective foam.
To close
Check that nothing has been left on top of the engine and that any component that was moved has been correctly repositioned.
Return the bonnet stay to its initial position.
Lower the bonnet carefully, then let it drop shut.
Check that the bonnet is properly secured.
Do not operate the bonnet in strong winds.
See also:
Access to the tools
The towing eye is installed in the boot
under the fl oor.
To gain access to it:
open the boot,
raise the fl oor,
remove the polystyrene storage box,
remove the towing eye from the
hold ...
Programmable heating
With the engine off, programmable heating preheats the coolant circuit in order
to optimise the engine operating temperature prior to starting.
The programmable heating system can be started imme ...
Rear lamps
Third stoplamp
The third stoplamp uses diodes which cannot be replaced.
In case of malfunction, contact a CITROËN dealer.
Number plate
1 Using a flat screwdriver, detach the transparent c ...