Headlamps
Front headlamp unit with Xenon bulbs (D1S)
Bulbs:
A S idelamp: W5W
B Dual-function Xenon lamp (dipped/main): D1S
C A ngular lighting: HP19
D Daytime-running lamp: HP24
For the maintenance of the front headlamp unit and the changing of HP19, D1S and
HP24 bulbs, contact a CITROËN dealer.
Sidelamp
1 Lift up the pegs E to remove the cover on the headlamp.
2 Remove the protective cap F.
3 Pull the bulb holder to remove it.
4 Replace the bulb and replace the bulb holder.
5 Replace the protective cap F.
6 Replace the cover and fix it in place using the pegs E.
Front headlamps fitted with Xenon bulbs: Because of risks of electrocution,
we advise you to contact a CITROËN dealer if there is any problem.
You are advised to change the D1S bulbs at the same time, if one of them has failed.
HEADLAMP UNIT
Bulbs:
A M ain beam: H1
B S idelamp: W5W
C Dipped beam: H7
D Bend lighting: H7
E Daytime-running lamp: HP24 For the maintenance of the front headlamp unit and
the changing of HP24 bulbs, contact a CITROËN dealer.
Main beam
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap G.
3 Disengage the retaining spring.
4 Remove the bulb and replace it, paying attention to the direction of fitting.
5 Replace the retaining spring.
6 Replace the protective cap G.
7 Replace the cover and fix it in place using the pegs F.
Sidelamp
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap G.
3 Pull the bulb holder to remove it.
4 Replace the bulb and replace the bulb holder.
5 Replace the protective cap G.
6 Replace the cover and fix it in place using the pegs F.
Halogen bulbs must not be changed until they have been off for a few minutes
(risk of serious burns).
Do not touch the bulb directly with your fingers, use a lint-free cloth.
It is essential that only anti-U.V. type bulbs are used in order not to damage the
headlamp.
Dipped beam
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap H.
3 Disconnect the connector by pressing it between the thumb and index finger.
4 Free the bulb from its two metal clamps.
5 Take out the bulb.
6 Replace the bulb, exerting a slight axial force.
7 Reconnect the connector, until it is all the way in.
8 Replace the protective cap H.
9 Replace the cover and fix it in place using the pegs F.
Bend lighting
1 Lift up the pegs F to remove the cover on the headlamp.
2 Remove the protective cap I.
3 Disconnect the connector by pressing it between the thumb and index finger.
4 Free the bulb from its two metal clamps.
5 Take out the bulb.
6 Replace the bulb, exerting a slight axial force.
7 Reconnect the connector, until it is all the way in.
8 Replace the protective cap I.
9 Replace the cover and fix it in place using the pegs F.
Front direction indicator
1 Remove the fixing screw of cover A using a torx tool, tip the cover over and
remove.
2 Remove the fixing screw of lamp B using a torx tool and pull the headlamp unit
to remove it from the bumper.
3 Detach the bulb C by pressing on bars 1 and 2.
4 Disconnect the connector (pull whilst pressing on the grey tongue using a flat
screwdriver).
5 Replace the bulb.
6 Connect the connector (push the grey tongue in well).
7 Replace the headlamp unit in the bumper.
8 Screw the headlamp unit in.
9 Position the cover using its guides and screw in.
Bulbs: HP24W
Front foglamp
1 Remove the fixing screw of cover A using a torx tool, tip the cover over and
remove.
2 Remove the fixing screw of lamp B using a torx tool and pull the headlamp unit
to remove it from the bumper.
3 Disconnect the connector D.
4 Remove the bulb by performing a quarter of a turn.
5 Replace the bulb.
6 Connect the connector D.
7 Replace the headlamp unit in the bumper.
8 Screw the headlamp unit in.
9 Position the cover using its guides and screw in.
Bulbs: H8
Side repeater
The side repeater is sealed.
If the bulb is faulty, replace the side repeater.
Contact a CITROËN dealer.
When replacing, be careful not to pinch the electrical cables.
See also:
Luggage cover blind (Tourer)
To install :
Position the left-hand end of the luggage-cover blind in its housing A behind
the rear benchseat.
Squeeze the blind’s control 1 and position it in place in its housing B to the
ri ...
Access
Locking/unlocking from the inside
With the doors and the boot closed, pressing button A allows you to control the
electric central locking and unlocking.
It is still possible to open the doors f ...
Leaving limiter mode
Turn thumb wheel 1 to the "0" position: the speed limiter
mode is deselected. The display returns to the distance
recorder.
...