Snow guard
SNOW GUARD
Moveable device which prevents the accumulation of snow by the radiator cooling fan.
Fitting
Bring the 2 sections of the snow guard up to the upper and lower sections of the front bumper.
Press on the surround to clip in one by one the fixing clips.
Remove
Using a screwdriver, lift it up to detach each fixing clip one by one.
Before fitting
After fitting
It is essential to remove the snow guard:
When the outside temperature exceeds 10 °C.
When towing.
When driving at speeds of over 120 km/h (approximately 75 mph).
See also:
Unique personality with new body styling
The exterior styling of the new Citroen C3 denotes creativity at the service
of well-being. The new model is soft by its curves and dynamic by its flowing,
taut lines. The front end gets a new &qu ...
Bonnet release
This should only be operated if the vehicle is stationary.
To release the bonnet, pull control A located under the dashboard to the right.
Move the lever A, located above the grille, to the righ ...
Activation
The system is activated as soon as reverse
gear is engaged, accompanied
by an audible signal.
The proximity information is given by:
- an audible signal, which becomes
more rapid as the vehicle a ...