See also:

Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then ...

Removing the wheel
Parking the vehicle Immobilise the vehicle where it does not block traffi c: the ground must be level, stable and not slippery. Apply the parking brake, switch off the ignition and engage fi r ...

Vehicle configuration
Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment: - wiper linked with reverse gear (refer to the "Visibility" ...