Locking the vehicle with exterior protection alarm only
Deactivation of the interior volumetric protection
- Switch off the ignition.
- Within ten seconds, press button A until the indicator lamp is lit continuously.
- Get out of the vehicle.
- Lock or deadlock the vehicle using the locking button on the remote control.
The exterior protection alarm alone remains activated; the indicator lamp on button A fl ashes once per second.
To be effective, this deactivation must be carried out each time the ignition is switched off.
Reactivation of the interior volumetric protection
- Unlock the vehicle using the unlocking button on the remote control.
- Relock the vehicle using the remote control.
The alarm is activated again with both types of protection; the indicator lamp on button A switches off.
See also:
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...
Bonnet release
This should only be operated if the vehicle is stationary.
To release the bonnet, pull control A located under the dashboard to the right.
Move the lever A, located above the grille, to the righ ...
Programming
Various automatic wiper control modes
are also available according to the following
options:
- automatic wiping for the windscreen
wipers,
- rear wiping on engaging reverse
gear.
Model with int ...