Triggering

Citroen C3 / Citroen C3 Owner's Manual / Access / Alarm / Triggering

This is indicated by sounding of the siren and fl ashing of the direction indicators for approximately thirty seconds.

After it has been triggered, the alarm is again operational.

If the alarm is triggered ten times in succession, the eleventh time will result in it becoming inactive.

If the indicator lamp on button A fl ashes rapidly, this indicates that the alarm was triggered during your absence. When the ignition is switched on, this fl ashing stops immediately.

To avoid triggering the alarm when washing your vehicle, lock it using the key in the drivers door lock.

Do not activate the alarm before disconnecting the battery, otherwise the siren will sound.

Failure of the remote control

  • Unlock the vehicle using the key in the drivers door lock.
  • Open the door; the alarm is triggered.
  • Switch on the ignition; the alarm stops.

Locking the vehicle without activating the alarm

Lock or deadlock the vehicle using the key in the drivers door lock.

Malfunction

When the ignition is switched on, lighting of the indicator lamp on button A for ten seconds indicates a siren fault.

Have it checked by a CITROËN dealer.

Automatic operation *

Depending on the legislation in force in your country, one of these cases may occur:

- 45 seconds after the vehicle is locked using the remote control, the alarm is activated, regardless of the status of the doors and boot.
- 2 minutes after the last door or the boot is closed, the alarm is activated.

To avoid triggering the alarm on entering the vehicle, fi rst press the unlocking button on the remote control.

    See also:

    Additional adjustments
    Head restraint height adjustment To raise the head restraint, pull it forwards and upwards at the same time. To remove the head restraint, press the lug A and pull the head restraint upwards ...

    Radio source
    Notes on radio reception Your radio will be subject to certain phenomena that are not encountered by domestic systems. The reception of AM and FM signals may suffer from interference, which is ca ...

    Manual override
    It is possible to adjust one or more functions manually while leaving the other functions in automatic mode. The "AUTO" symbol switches off. To return to automatic mode, press the " ...