See also:

Bonnet release
This should only be operated if the vehicle is stationary. To release the bonnet, pull control A located under the dashboard to the right. Move the lever A, located above the grille, to the righ ...

Triggering
This is indicated by sounding of the siren and fl ashing of the direction indicators for approximately thirty seconds. After it has been triggered, the alarm is again operational. If the alarm is ...

Towing your vehicle
On the front bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on the towed vehicle. Place ...