Main lighting
The various front and rear lamps of the vehicle are designed to adapt the driver's visibility progressively according to climatic conditions:
- sidelamps, to be seen,
- dipped beam headlamps to see
without dazzling other drivers,
- main beam headlamps to see clearly
when the road is clear.
See also:
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...
Electric windows
Press or pull the switch.
The window stops as soon
as the switch is released.
The electric window switches
remain operational for approximately
45 seconds after the ignition
is switched off or ...
Ventilation
Air intake
Make sure that the exterior air inlet grille at the base of the windscreen is
clean (free of dead leaves, snow etc.).
If washing the vehicle with a high pressure jet, take care to avo ...