Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will not have any effect unless you press the pedal fi rmly past the point of resistance .
The speed limiter is deactivated temporarily and the programmed speed, which is still displayed, fl ashes.
Returning to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the fl ashing of the programmed speed.
See also:
Deactivation
In exceptional conditions (starting a vehicle
which is bogged down, stuck in
snow, on soft ground...), it may be advisable
to deactivate the ASR and ESP
systems, so that the wheels can move
freel ...
Interior rear view mirror
Manual interior mirror
The lever on the lower edge enables you to place the rear view mirror in either
of two positions:
Day position: the lever is not visible.
Night position (antidazzle): the ...
Visual and audible front and rear parking assistance
Proximity sensors are located in the front and rear bumpers of your vehicle.
When manoeuvring, whether forwards or in reverse, at a speed below approx. 6 mph,
they warn you of the presence of an ...