See also:

Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then ...

Display settings
Once the "Display settings" menu has been selected, you can gain access to the following settings: - year, - month, - day, - hour, - minutes, - 12 or 24 hour mode. Once you have s ...

Using the kit
This procedure, comprising several steps, must be carried out in full. Switch off the ignition. Turn the selector A to the "SEALANT" position. Check that the switch B is in posi ...