Clock
Adjusting the time - Choice of units
To adjust the time of the clock and choose the units used by the screen, use the right-hand button on the instrument panel, carrying out the operations in the following order:
- press the button for more than two seconds: the minutes fl ash,
- press the button to increase the minutes,
- press the button for more than two seconds: the hours fl ash,
- press the button to increase the hours,
- press the button for more than two seconds: 24 H or 12 H is displayed,
- press the button to select 24 H or 12 H,
- press the button for more than two seconds: °C or °F is displayed,
- press the button to select °C or °F,
- press the button for more than two seconds to complete the adjustments.
After approximately 30 seconds without any action, the screen returns to the normal display.
See also:
Starting using another battery
Connect the red cable to the positive
terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
Connect one end of the green or black
cable to ...
Rear lamps (tourer)
Rear lamp on wing
Remove the lateral boot trim A.
To do so :
1 Pull it towards towards the inside of the boot.
2 Pull it upwards.
3 Disconnect the connector B.
4 Unscrew the fixing screw C.
...
Deactivation
In exceptional conditions (starting a vehicle
which is bogged down, stuck in
snow, on soft ground...), it may be advisable
to deactivate the ASR and ESP
systems, so that the wheels can move
freel ...