Additional adjustments
Head restraint height adjustment
- To raise the head restraint, pull it forwards and upwards at the same time.
- To remove the head restraint, press the lug A and pull the head restraint upwards.
- To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
- To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint is fi tted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head.
Never drive with the head restraints removed; they must be in place and adjusted correctly.
See also:
Electric parking brake
The electronic parking brake combines 2 operational modes:
AUTOMATIC:
Automatic application when the engine is stopped and automatic release on use
of the accelerator (automatic operation by def ...
Starting the vehicle
Insert the key in the ignition switch.
The system recognises the starting
code.
Turn the key fully towards the fascia
to position 3 (Starting) .
When the engine starts, release the
key. ...
Bonnet release
This should only be operated if the vehicle is stationary.
To release the bonnet, pull control A located under the dashboard to the right.
Move the lever A, located above the grille, to the righ ...