Activation
These systems are activated automatically each time the vehicle is started. They come into operation in the event of a grip or trajectory problem.
This is indicated by fl ashing of this warning lamp on the instrument panel.
See also:
Starting using another battery
Connect the red cable to the positive
terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
Connect one end of the green or black
cable to ...
Using the kit
This procedure, comprising several
steps, must be carried out in full.
Switch off the ignition.
Turn the selector A to the "SEALANT"
position.
Check that the switch B is in posi ...
Radio source
Notes on radio reception
Your radio will be subject to certain phenomena that are not encountered by domestic
systems. The reception of AM and FM signals may suffer from interference, which
is ca ...