Access to the spare wheel

The spare wheel is installed in the boot under the fl oor.
According to country, the spare wheel may be steel or of the "space saver" type.
To gain access to it, refer to the paragraph "Access to the tools" on the previous page.
Fitting the steel or "spacesaver" type spare wheel
If your vehicle is fi tted with alloy wheels, it is normal to notice, when tightening the bolts on fi tting, that the washers do not come into contact with the steel or "space-saver" type spare wheel. The wheel is secured by the conical contact of each bolt.
See also:
Interior lamps
Interior lamps
Unclip the transparent cover of the interior lamp to reach the bulb.
Bulb: W 5W
Spotlamp
Detach the cover.
To access the bulb, detach if necessary the partition of the affected s ...
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the
ignition is switched on, this code must
be recognised in order for starting to be
possible.
T ...
Engaging reverse gear
Raise the ring under the knob and
push the gear lever to the left then
forwards.
Only engage reverse gear when
the vehicle is stationary with the
engine at idle.
As a safety precaution and to ...






