Access to the tools
The extraction pliers and the spare fuse storage locations are fi tted to the back of the dashboard fusebox cover.
For access to them:
- open the glove box lid,
- unclip the fusebox cover by pulling on the side,
- remove the cover completely,
- remove the pliers.
See also:
Cold weather screen "snow guard"
The screen supplied with the vehicle (depending on country) should be fitted
during the winter period. It is essential to remove it when temperatures are above
10 degrees Celsius.
Don’t forget to ...
Rear lamps (tourer)
Rear lamp on wing
Remove the lateral boot trim A.
To do so :
1 Pull it towards towards the inside of the boot.
2 Pull it upwards.
3 Disconnect the connector B.
4 Unscrew the fixing screw C.
...
Charging the battery using a
battery charger
Disconnect the battery from the vehicle.
Follow the instructions for use provided
by the manufacturer of the
charger.
Reconnect starting with the negative
terminal (-).
Check that the t ...