Manual guide-me-home lighting
Temporarily keeping the dipped headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor.
Switching on
- With the ignition off, "fl ash" the headlamps using the lighting stalk B .
- A second "headlamp fl ash" switches the function off again.
Switching off
The manual guide-me-home lighting switches off automatically after a set time.
See also:
Closing
Take the stay out of the support
notch.
Clip the stay in its housing.
Lower the bonnet and release it at
the end of its travel.
Pull on the bonnet to check that it is
fully latched.
...
Visibility
Lighting
Ring A
Lamps off.
Automatic lighting of headlamps.
Sidelamps.
Dipped beams/main beams.
Pull the control stalk towards you to change between dipped beam and main beam.
Ring B
Fr ...
Starting using another battery
Connect the red cable to the positive
terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
Connect one end of the green or black
cable to ...