Manual guide-me-home lighting
Temporarily keeping the dipped headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor.
Switching on
- With the ignition off, "fl ash" the headlamps using the lighting stalk B .
- A second "headlamp fl ash" switches the function off again.
Switching off
The manual guide-me-home lighting switches off automatically after a set time.
See also:
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...
Bend lighting
With dipped or main beams, this function provides additional lighting for the
inside of a bend.
This lighting is most useful when travelling at low and medium speed (urban driving,
winding road, ...
Using the kit
This procedure, comprising several
steps, must be carried out in full.
Switch off the ignition.
Turn the selector A to the "SEALANT"
position.
Check that the switch B is in posi ...