Operating fault

Citroen C3 / Citroen C3 Owner's Manual / Visibility / Headlamp adjustment / Operating fault

In the event of a fault with the brightness sensor, the lighting come on, this warning lamp is displayed on the instrument panel and/or a message appears on the multifunction screen, accompanied by an audible signal. Consult a CITROËN dealer.

In fog or snow, the brightness sensor may detect suffi cient light. Therefore, the lighting will not come on automatically.

Do not cover the brightness sensor, coupled with the rain sensor and located in the centre of the windscreen behind the interior mirror; the associated functions would no longer be controlled.

    See also:

    Dashboard lighting rheostat
    The rheostat is active if the sidelamps are on and applies to: - the instrument panel - the displays The desired brightness is selected via control A or by pressing control B. With control B, ...

    Vehicle configuration
    Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment: - wiper linked with reverse gear (refer to the "Visibility" ...

    Manual controls
    The lighting commands are issued directly by the driver by means of the ring A and the stalk B . Model without AUTO lighting Model with AUTO lighting A. Main lighting mode selection ring, wi ...