Headlamp adjustment
To avoid causing a nuisance to other road users, the height of the headlamps should be adjusted in relation to the load in the vehicle.
0 . 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
2. 5 people + maximum authorised load.
3. Driver + maximum authorised load.
The initial setting is position "0" .
See also:
Diesel injection equipment
Protective cover for HDi 138 engines:
Remove the protective cover by first unclipping at 3, then 1 and 4.
Unclip at 2 by pulling towards you, then lift up.
To refit the protective cover, firstly ...
Access to the tools
The towing eye is installed in the boot
under the fl oor.
To gain access to it:
open the boot,
raise the fl oor,
remove the polystyrene storage box,
remove the towing eye from the
hold ...
Diesel injection equipment
Bleeding of water from the diesel fuel filter
To be bled on a regular basis (at every oil change). To evacuate the water, slacken
the bleed screw or the water in diesel fuel sensor, which is loca ...