Front side reading lamps
With the ignition on, the fi rst press of the corresponding switch switches on the reading lamp concerned in permanent lighting mode.
Following a second press, it comes on:
- when the vehicle is unlocked,
- when the key is removed from
the ignition,
- when a door is opened,
- when the remote control locking
button is pressed, in order to
locate your vehicle.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- 30 seconds after the last door is
closed.
See also:
Towing another vehicle
On the rear bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps
on the towed vehicle.
When t ...
Front seat belts
A. Fitting the belt.
B. Fastening.
C. Check that the belt is correctly fastened
by pulling on the belt webbing. ...
Luggage cover blind (Tourer)
To install :
Position the left-hand end of the luggage-cover blind in its housing A behind
the rear benchseat.
Squeeze the blind’s control 1 and position it in place in its housing B to the
ri ...