Interior lighting
Interior lamp (1/W5W)
Unclip the cover of the interior lamp 1 with a thin screwdriver, close to the button, to access the faulty bulb.
Side reading lamps (2/W5W)
Unclip the cover of the reading lamp 2 with a small screwdriver at the switch end for access to the faulty bulb.
Boot lamp (W5W)
Unclip the unit by pushing it from the rear.
Sill lamps (W5W)
Unclip the lamp for access to the bulb.
See also:
Vehicle configuration
Once the "Vehicle Confi guration" menu
has been selected, you can activate or
deactivate the following equipment:
- wiper linked with reverse gear (refer
to the "Visibility" ...
Steering wheel adjustment
1. Unlocking the steering wheel adjustment.
2. Height and reach adjustment.
3. Locking the steering wheel adjustment.
For reasons of safety, these
operations must only be carried
out with the v ...
Operating fault
In the event of a fault with
the brightness sensor,
the lighting come on, this
warning lamp is displayed
on the instrument panel and/or a message
appears on the multifunction screen,
accompanied ...