See also:

Towing your vehicle
On the front bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on the towed vehicle. Place ...

Access to the tools
The tools are installed in the boot under the fl oor. To gain access to them: open the boot, raise the fl oor, remove the polystyrene storage box, unclip and remove the box containing ...

Vehicle configuration
Once the "Vehicle Confi guration" menu has been selected, you can activate or deactivate the following equipment: - wiper linked with reverse gear (refer to the "Visibility" ...