Changing bulbs
See also:
Putting the wheel back in place
Put the wheel back in its housing.
Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
Tighten fully until the central bolt
clicks to retain th ...
Boot
Luggage securing rings
Use the 2 side fi xings at the rear, as well as the 6 anchoring rings on the
boot floor and the rear seat backrest, to secure your loads. For safety reasons,
in case of h ...
HDi 90 and HDi 110 FAP engines
Fill the fuel tank with at least fi ve litres
of diesel.
Open the bonnet.
Depending on version, unclip the
cover to gain access to the repriming
pump.
Squeeze and release the repriming
...






