Folding the backrest
- Move the corresponding front seat forward if necessary.
- Check that the seat belt is positioned correctly on the side of the seat back.
- Place the head restraints in the low position.
- Pull control 1 forwards to release the seat back 2 .
- Fold the seat back 2 on to the cushion.
See also:
Locking the vehicle with full
alarm
Activation
Switch off the ignition and get out of
the vehicle.
Lock or deadlock the vehicle using the
locking button on the remote control.
The alarm is activated; the indicator lamp
o ...
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed
speed will not have any effect unless you press the pedal
fi rmly past the point of resistance .
The speed limiter is deactivated temporarily ...
Programming
Turn thumb wheel 1 to the
"CRUISE" position: the cruise
control mode is selected but is
not switched on (PAUSE).
Set the programmed speed by accelerating
to the required speed,
then ...