See also:

Using the kit
This procedure, comprising several steps, must be carried out in full. Switch off the ignition. Turn the selector A to the "SEALANT" position. Check that the switch B is in posi ...

Electrical adjustments
To adjust the electrical seats, switch on the ignition or start the engine if the vehicle has gone into economy mode. 1. Adjustment of the seat height and angle, and longitudinal adjustment a Ra ...

Putting the wheel back in place
Put the wheel back in its housing. Unscrew the yellow central bolt by a few turns then put it in place in the centre of the wheel. Tighten fully until the central bolt clicks to retain th ...