Towing another vehicle
- On the rear bumper, unclip the cover by pressing at the bottom.
- Screw the towing eye in fully.
- Install the towing bar.
- Switch on the hazard warning lamps on the towed vehicle.
When towing with all four wheels on the ground, always use a towing bar.
When towing with only two wheels on the ground, always use professional lifting equipment.
When towing with the engine off, there is no longer any assistance for braking or steering.
See also:
Closing
Take the stay out of the support
notch.
Clip the stay in its housing.
Lower the bonnet and release it at
the end of its travel.
Pull on the bonnet to check that it is
fully latched.
...
Display in the instrument panel
The cruise control or speed limiter mode
appears on the instrument panel when
it is selected.
Cruise control
Speed limiter ...
Additional adjustments
Head restraint height adjustment
To raise the head restraint, pull it forwards
and upwards at the same time.
To remove the head restraint, press the
lug A and pull the head restraint upwards ...