See also:

Using the kit
This procedure, comprising several steps, must be carried out in full. Switch off the ignition. Turn the selector A to the "SEALANT" position. Check that the switch B is in posi ...

Access to the tools
The towing eye is installed in the boot under the fl oor. To gain access to it: open the boot, raise the fl oor, remove the polystyrene storage box, remove the towing eye from the hold ...

Bonnet release
Bonnet This operation should only be performed while the vehicle is stationary. Open the door. To unlock, pull release lever A. Lift up lever B, then raise the bonnet. Note: The panel may be ...